Designed with an upper cover and a lower cover, it can be installed, debugged and maintained conveniently.
Multiple can be used in parallel, and the terminal load must be connected at the end.
The pressing sheet on the manual fire alarm call point will not get crushed after it is pressed, but can be reset by a special tool, so it can be used repeatedly.
Read more detail
C9060T is a conventional manual call point (hereinafter referred to MCP), When the manual call point is operating normally,the light is non-luminance. If it is pressed after a fire is manually confirmed, the indicator will remain lit.
| Power supply | ||
| Executive standard | EN54-11 | |
| Working mode | Two-wire bus system | |
| Working voltage | DC18-28 V | |
| Working current | Monitoring current=0mA ,Action current<30mA | |
| Weight | ≤95% (40℃±2℃, without condensation) | |
About 105g (with base) | ||
| Operating temperature | Indoor type, temperature :-10℃ ~ +55℃, relative humidity≤95%(40℃±2℃ without condensation) | |
| Starting part | A resettable plastic pressing sheet. It can be manually resetwith a special tool after being pressed down | |
| Starting mode | Press down the pressing sheet manually | |
| Indicator light | The ALARM indicator will not be lit at ordinary times andremain lit in the alarm status | |
If you need any help, please do not hesitate to contact us by Email, we are sure that you will get our response as soon as possible.
Headquarter in Shenzhen
Tel: +86 755 2690 9106
Fax: 86 755 8622 6969
E-mail: sales@sz-sanjiang.com
Add: 3F, Guangcai Xin Tian Di Building, Nanshan Road, Nanshan District, Shenzhen, 518054, P.R.China
Tips